Skip to main content Skip to search Skip to main navigation
Go to homepage

Twsbi Fountain Pen ECO Espresso with Bronze (B)

Product number: TW097.B
GTIN/EAN 4711467441171
MPN M7441170
Manufacturer: TWSBI

€60.00

incl. VAT

- free shipping from 70€
Select Nib Size

The TWSBI ECO Espresso with Bronze is a piston filler with espresso brown cap and espresso brown piston knob, clear plastic body and bronze-colored trim parts – clip, rings and nib in matching bronze tone. The integrated piston mechanism fills directly from the ink bottle and eliminates the need for cartridges or converters. The transparent grip section allows you to see the ink level at any time – and your chosen ink becomes a visible part of the pen. Available in nib sizes EF, F, M, B and 1.1.

Features

  • Bronze-colored stainless steel nib: The nib is finished in bronze and matches the color of the clip and trim rings. Bronze TWSBI nibs are known to write slightly wider than comparable silver-colored nibs – a detail that is particularly relevant for F and EF sizes.
  • Piston mechanism with ~1.7 ml capacity: Unscrew the end cap, dip the nib, screw the end cap back on – done. No cartridge changes, no converter needed. The ink volume is sufficient for long writing sessions without refilling.
  • Transparent body as a demonstrator: The clear grip section makes the ink level visible and lets the color and shimmer of your chosen ink show from the outside – particularly beautiful with warm brown tones or shimmer inks.
  • Hexagonal cap with internal seal: The hexagonal shape prevents the pen from rolling off the desk. The inner cap seal keeps the nib moist, even if the pen is not used for extended periods.
  • Postable cap: The cap can be securely attached to the back end of the body – the pen extends to a balanced writing length.
  • Fully disassemblable: TWSBI supplies the ECO with a wrench and silicone oil – for maintenance, lubrication and complete disassembly of the piston mechanism at home.

Usage & Tips

  • Filling: Unscrew the end cap, fully immerse the nib in the ink bottle, slowly screw the end cap back on – the piston draws ink into the body. For maximum fill capacity: repeat the process two to three times, holding air bubbles upward with the nib and slowly push them out.
  • Nib size F: Delivers a fine, defined line – well suited for smaller handwriting and narrow-ruled notebooks. On smooth, calendered paper, ink behavior and shading are most visible.
  • Use color combination: Warm brown and caramel tones, copper-colored or shimmer inks play beautifully with the espresso-bronze color scheme. The transparent body makes the ink color a design element.
  • Inner cap protects the nib: If you don't use the pen for a few days, you can simply leave it capped – the inner seal keeps the ink fresh and the nib ready to write.
  • Maintenance: Don't use the supplied wrench and silicone oil right away – they are intended for long-term care. Lightly re-lubricate the piston mechanism every few months as needed.
  • Cleaning before first use: TWSBI tests the nibs at the factory by dipping – the pen may have ink residue on the nib. Rinse with lukewarm water before filling for the first time.

For Pen Enthusiasts

The ECO Espresso with Bronze is part of TWSBI's so-called "Breakfast Collection" – a color family that introduces the third variant with warm espresso brown and bronze accents after Caffé and Crème. The nib is an iridium-tipped stainless steel nib with bronze coating; since TWSBI's bronze nibs tend to write slightly wider than their silver counterparts, it's worth choosing a finer size if a very fine line is desired. The ECO's piston mechanism is structurally identical to that of the TWSBI Diamond 580 – a fully plastic mechanism that can be completely disassembled and serviced with the supplied wrench. The grip section tapers to a triangular shape towards the nib tip, which allows for natural finger guidance when held close to the tip.

Technical Specifications

Model: TWSBI ECO Espresso with Bronze
Available nib sizes: EF, F, M, B, 1.1
Nib material: Stainless steel, bronze-coated
Body material: Plastic (acrylic)
Ink reservoir: Integrated piston mechanism (approx. 1.7 ml)
Length closed: 139 mm
Length without cap: 131 mm
Length with cap posted: 161 mm
Max. diameter: 15.2 mm
Origin: Taiwan
Included: Pen, wrench, silicone oil – without ink

Presentation options

Zoom
%
Font size
px
Line height
Letter spacing
px